Remote Operation; Voice Guidance - Panasonic KX-TG6051AL Operating Instructions Manual

Remote operation

Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to messages.
The unit's voice guidance prompts you
to press certain dial keys to perform
different operations.
Important:
L In order to operate the answering
system remotely, you must first set a
remote code (page 34). This code
must be entered each time you
operate the answering system
remotely.
Using the answering system
remotely
1
Dial your phone number from a touch
tone phone.
2
After the greeting message starts,
enter your remote code (page 34).
L The unit plays back new
messages.
L The voice guidance informs you of
the available commands.
3
Control the unit using remote
commands (page 33).
4
When finished, hang up.

Voice guidance

During remote operation, the unit's
voice guidance starts and prompts you
to press {1} to perform a specific
operation, or press {2} to listen to more
available operations. Operations are
presented by voice guidance in the
following order:
– Play back all messages
– Play back new messages
– Record a message
– Erase all messages
Answering System
Note:
L If you do not press any dial keys
within 10 seconds after a voice
guidance prompt, the unit
disconnects your call.
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Remote command
Repeat message
{1}
(during playback)
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
Stop playback
{9}
Turn answering system
{0}
off
Erase message
{*}{4}
currently playing
Erase all messages
{*}{5}
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance starts.
*1
*2
33