Mitsubishi FX2N-5A User Manual page 99

FX2N-5A Special function block
Figure 8.1: Example program
X0
Operation start
instruction
M100
The I/O characteristics can be written (BFM #21) to one channel at a time, or two or more
channels at a time.
PLS M100
TO K0 K0 H1600 K1
TO K0 K1 H0001 K1
TO K0 K41 K0 K1
TO K0 K42 K0 K1
TO K0 K51 K1
K6000
TO K0 K52 K6000 K1
TO K0 K44 K0 K1
TO K0 K54 K1
K10000
TO K0 K45 K0 K1
TO K0 K55 K6000 K1
TO K0 K21 K1
H001B
Adjustment of I/O Characteristics 8
Specifies the input mode of CH1 to CH4.
Specifies the output mode.
Writes the offset value of CH1.
Writes the offset value of CH2.
Writes the gain value of CH1.
Writes the gain value of CH2.
Writes the offset value of CH4.
Writes the gain value of CH4.
Offset value of analog output channel.
Gain value of analog output channel.
Offset value/gain value of analog input channel CH1,
CH2, CH4 and the analog output channel is write.
8-9