Joining Or Leaving A Call Distribution Group (Log-In/Log-Out) - Panasonic KX-TD816 Operating Instructions Manual

1.7 Useful Features

Joining or Leaving a Call Distribution Group (Log-In/Log-Out)

Allows you to assign the Log-In mode or Log-Out mode
within a hunting, DISA ring or UCD group. When in the
Log-Out mode, you can leave the group temporarily,
preventing hunting calls from being sent to your
extension. The lighting patterns of the Log-In/Log-Out
button on a proprietary telephone and status are as
follows.
Log-In / Log-Out (Using the Log-In/Log-Out button)
PT
Lift the handset or press
SP-PHONE/MONITOR.
Log-In / Log-Out (Using the feature number)
Any Telephone
Lift the handset
or press
SP-PHONE/MONITOR.
• The default is "Log-In" mode.
!
!
• There should be at least one extension in the group that is in the Log-In mode.
• When in the Log-Out mode, the last extension in a UCD group cannot leave the group.
PT • The Log-In/Log-Out button can be assigned to a flexible CO button.
• 1.2 Proprietary Telephone Settings, "Customizing the Buttons on Your Telephone",
• See the Installation Manual, Section 3, "Station Hunting".
• See the Installation Manual, Section 3, "Direct Inward System Access (DISA)".
• See the Installation Manual, Section 3, "Uniform Call Distribution (UCD)".
• See the Installation Manual, Section 3, "Log-In/Log-Out".
Technical Manuals Online! - http://www.tech-man.com
Off: Log-In mode
Red: Log-Out mode
Press the flexible button
assigned as the
Log-In/Log-Out button.
• The indicator light turns off in Log-In mode or turns steady red in Log-Out mode.
7 3 6
7 3 6
For Log-In mode: Dial 7360#.
For Log-Out mode: Dial 7361#.
• Single line telephone users can dial "0" instead of "#".
Log-In/Log-Out Button
Confirmation tone
and dial tone
0 # To Log-In.
1 # To Log-Out.
Confirmation tone
and dial tone
Log-In
Log-Out
UCD Group
Hunting Group
DISA Ring Group
Hang up or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Operations
1-75