Follow Me - Panasonic KX-TD816 Operating Instructions Manual

1.6 Before Leaving Your Desk
!
• If an incoming outside call is forwarded to an outside (CO) line, the "Outside-to-Outside
!
• Up to 32 digits (including the line access code) can be programmed.
• If a CPC or reverse signal is sent to an outside (CO) line before the assigned duration time
• This feature cannot be used for incoming outside calls from lines assigned as "Normal", by
• In the account code verify-all, verify-toll and forced modes, an account code must be stored

Follow Me

You can set the "Call Forwarding" feature from the destination extension. This is useful if you
forget to set "Call Forwarding — All Calls" before you leave your desk.
Setting
PT and SLT
At the destination extension
Lift the handset
or press the
SP-PHONE/MONITOR
button.
• You may press the flexible button
assigned as the FWD/DND button
instead.
! • This feature can be canceled at your extension or the destination extension.
!
Technical Manuals Online! - http://www.tech-man.com
(CO-to-CO) Line Call Duration Time" is applied to the call and the line will be
disconnected when it expires (default: 10 min.). An alarm tone is sent to both parties
15 seconds before the assigned duration time limit.
limit, a call between two external parties will be disconnected.
System Programming.
by pressing " " and entering the account code after the line access code (" " is not
regarded as a pause).
FWD/DND
For a PT
7 1
For an SLT
For a PT: Press
FWD/DND.
For an SLT: Dial 71.
5 extension no.
Dial 5. Enter your Dial #.
extension number
(100 through 199).
• The FWD/DND indicator light flashes red
slowly.
• Single line telephone users can dial "0"
instead of "#".
#
Confirmation Hang up or
tone and press the
dial tone SP-PHONE/MONITOR
button.
Operations
1-55