Using Overhead Ber Test Function - HP 37717C User Manual

Making Measurements

Using Overhead BER Test Function

Using Overhead BER Test Function
Description You can perform a Bit Error Rate test on chosen bytes of the section, line
and path overhead bytes.
You can access the transmit Overhead BER on the
TEST FUNCTION
HOW TO: 1 Set up the SONET transmit interface and payload required.
2 Set up the SONET receive interface and payload required.
3 Choose the overhead byte to be tested on the
4 Choose the overhead byte to be tested on the
5 Press
6 The PRBS pattern can be errored by pressing
82
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
display.
.
display
TEST FUNCTION
display.
TEST FUNCTION
to start the test.
RUN/STOP
SONET
TRANSMIT
SONET
RECEIVE
SONET
TRANSMIT
.
SINGLE