L k If another phone is connected to
the same line (page 19), you can also
take the call by lifting its handset.
MUTE button N
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
To mute your voice, press {MUTE}.
L To return to the conversation, press
{MUTE}.
Note:
L {MUTE} is a soft key visible on the
handset display during a call.
L When this feature is turned on,
{MUTE} flashes.
FLASH button N
k
Pressing {FLASH} allows you to use
special features of your host PBX such
as transferring an extension call, or
accessing optional telephone services.
Note:
L To change the flash time, see page
56.
l
Pressing {FLASH} allows you to use
optional services from A. Visit
www.joip.com or contact the A
service provider for details.
Making another call on the IP line:
While you are talking with an outside
caller, you can make a 2nd call on the
same line by pressing {FLASH} then
dialing.
L The 1st call is put on hold.
L To hang up the 2nd call, press {OFF}.
The alarm tone starts to sound. Press
{IP} to talk with the 1st caller again. If
you do not press {IP}, the alarm tone
sounds for 1 minute and the 1st call is
disconnected.
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Making/Answering Calls (Handset)
You can combine the calls to make a
conference call by pressing {FLASH}
again after the 2nd call is connected.
L To hang up the 2nd call and talk with
the 1st caller, press {FLASH}.
L To hang up both lines, press {OFF}.
For Call Waiting service users
N
Call Waiting service is provided by your
landline service provider and A.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a Call Waiting tone.
Press {CALL WAIT} to answer the 2nd
call.
L To switch between calls, press {CALL
WAIT}.
Note:
L k Please contact your landline
service provider for details.
L l Please visit www.joip.com or
contact the A service provider for
details.
Temporary tone dialing (for
rotary/pulse service users)
k N
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
Handset clarity booster N
This feature can improve sound clarity
when the handset is used in an area
where there may be interference. During
an outside call, this feature is turned on
33