Vivitar DVR 947HD User Manual page 25

 Select "Yes" and press the SET button to begin.
The memory card will be completely formatted.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to the
Factory Default Settings.
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the Firmware menu.
The "Restore Factory Settings" is selected.
3)
4) Press the SET button to reset the camera to the factory default settings.
5) You will be asked to confirm the resetting to the factory default settings.
 Select "No" and press the SET button to exit the menu and return to the previous mode without
resetting to the default settings.
 Select "Yes" and press the SET button to proceed with the reset.
You will then automatically exit the menu and return to the previous mode with the digital
camera settings set to the Factory Default Settings.
Note: After RESETTING to the default settings, it is recommended to select your system
Language, Date/Time and ViviLink for Photos and Videos. If you do not, the next time your camera
is powered on, you will be prompted to define those settings.
24