Sound Field And Sound Quality; Surround; Changing The Sound Quality; Preset Eq - Panasonic SC-VK680 Operating Instructions Manual

• The following sound effects may not be available or have no effect depending on the type of source, or when microphone(s) or
headphones are inserted, or karaoke function is on or play speed is on.
• You may experience a reduction in sound quality when these sound field systems are used with some sources. If this occurs, turn
the sound field system off.

Surround

Enjoy a surround-like effect when using front speakers. The
effect broadens when playing discs with surround effects and
sound seems to come from speakers on either side of you.
Press [SURROUND] (main unit: [SURROUND]).
Optimum seating position
Note
• This does not work or has less effect with some discs.
• Choose "STEREO" if it causes distortion.
• Do not use in combination with surround effects on other
equipment.

Changing the sound quality

 Manual EQ
Create your own sound quality effects.
1
Press [SOUND] to select "M.EQ".
2
Change the sound quality with the cursor buttons.
 Select the sound range to be adjusted with [w] or [q].
BASS MID TREBLE
 (Within 7 seconds or so)
Adjust the level with [u, 2/REW] or [i, 1/FF].
(–3 to +3)
Repeat step 2 to set the desired sound quality.
The original display is restored on the display panel in about 3
seconds.
On the main unit
1
Press [MANUAL EQ].
MID TREBLE
"BASS" is selected and adjusted by turning
[– BASS CONTROL +].
2
Adjust the level for "MID" and "TREBLE" with
[2/REW/u] or [1/FF/i].
The changes you make are stored and automatically
recalled the next time you select "M.EQ".
 Enhancing the bass
You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your room
are not optimal. The unit automatically selects the most suitable
setting according to the type of playback source.
Press [SOUND] to select "H.BASS" and press [q] to make
selection: H. BASS ON  H. BASS OFF
Pressing [H.BASS] on the main unit will also makes the
"H.BASS": H. BASS ON  H. BASS OFF
 Adjusting the subwoofer
Press [SOUND] to select "SUBW LVL" and press [q] to
make selection:
Pressing [SUBWOOFER] on the main unit also changes the
setting.
 Adding an echo effect
Enjoying karaoke ( page 28)