Specifi Cations; Maintenance; When Moving The Unit - Panasonic SC-PM54 Operating Instructions Manual

Specifi cations
AMPLIFIER SECTION
RMS OUTPUT POWER both channel
driven
10% total harmonic distortion
For United Kingdom and
Continental Europe
50 W per channel (6 Ω)
1 kHz
For Australia and N.Z.
1 kHz
(Low channel) 45 W per channel (6 Ω)
8 kHz
(High channel) 45 W per channel (6 Ω)
Total Bi-Amp power 90 W per channel
Input Impedance
Music port
Output Impedance
Headphone
Phone jack
Terminal
Music port input jack
Terminal
FM TUNER SECTION
Frequency range
87.50 MHz to 108.00 MHz (50 kHz steps)
Sensitivity
S/N 26 dB
75 Ω (unbalanced)
Antenna terminals
Preset station
AM TUNER SECTION
Frequency range
522 kHz to 1629 kHz (9 kHz steps)
520 kHz to 1630 kHz (10 kHz steps)
Sensitivity
For United Kingdom and
Continental Europe
S/N 20 dB (at 999 kHz)
For Australia and N.Z.
S/N 20 dB (at 1000 kHz)
CASSETTE DECK SECTION
Track system 4-track, 2-channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor
Recording system AC bias 100 kHz
Erase system AC erase 100 kHz
Tape speed
Overall frequency response (+3, –6 dB at
DECK OUT)
NORMAL
S/N RATIO 54 dB (A weighted)
Wow and fl utter 0.08 % (WRMS)
Fast-forward and rewind time
Approx. 120 seconds with C-60 cassette tape

Maintenance

If the surfaces are dirty If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner, crisper sound For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).
RQTV0102_2B.indd 15 RQTV0102_2B.indd 15
CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 formatted
disc)
(3) MP3
Sampling frequency
CD
MP3
Bit rate
MP3
Decoding
Pick up
Wavelength
Beam source
250 mV 12kΩ
Laser power
16 Ω to 32 Ω
(For Norge)
Bølgelengde
Laserstyrke
Stereo, 3.5 mm
Audio output (Disc)
Stereo, 3.5 mm
Number of channels
Frequency response
Wow and fl utter
Digital fi lter
0.3 µV (IHF)
D/A converter
0.2 µV
SPEAKER SECTION
FM 15 stations
SC-PM53 Type
AM 15 stations
SC-PM54 Type
SC-PM53 Speaker(s)
Woofer
Tweeter
SC-PM54
Speaker(s)
Woofer
Tweeter
Super Tweeter
900 µV/m
Impedance
Input power (IEC)
900 µV/m
For United Kingdom and
Continental Europe
For Australia and N.Z.
HIGH
LOW
Output sound pressure
DC servo motor
Crossover frequency
For United Kingdom and
Continental Europe
4.8 cm/s
For Australia and N.Z.
35 Hz to 14 kHz
Frequency range
44.1 kHz
32 kHz, 44.1 kHz, 48 kHz Dimensions (W x H x D)
32 kbps to 384 kbps
16/20/24 bit linear
GENERAL
785 nm
Power supply
Semiconductor laser
CLASS 1
785 nm
Ingen farlig stråling sendes ut
Power consumption
2-Channel
20 Hz to 20 kHz (+1dB, -2 dB)
Below measurable limit
Dimensions (W x H x D)
8 fs
MASH (1 bit DAC)
Mass
2 way, 2 speaker system
3 way, 3 speaker system
Operating temperature range
10 cm cone type (6 Ω)
6 cm cone type (6 Ω)
Operating humidity range
10 cm cone type (6 Ω)
6 cm cone type (6 Ω)
2.5 cm piezo type
6 Ω
1. Specifi cations are subject to change
50 W (Max)
2. Total harmonic distortion is measured by
90 W (Max)
90 W (Max)
3.
80 dB/W (1.0 m)
3.5 kHz
2.2 kHz

When moving the unit

1 Remove all discs.
2 Press [y/I] to turn the unit off.
3 Disconnect the AC mains lead.
For United Kingdom and
Continental Europe
55 Hz to 32 kHz (-16 dB)
78 Hz to 28 kHz (-10 dB)
For Australia and N.Z.
45 Hz to 35 kHz (-16 dB)
50 Hz to 31 kHz (-10 dB)
144 mm x 249 mm x 200 mm
SC-PM53 Mass
SC-PM54
Mass
For Continental Europe
AC 230V, 50 Hz
For United Kingdom,
Australia and N.Z.
AC 230 to 240 V, 50 Hz
For United Kingdom and
Continental Europe
For Australia and N.Z.
175 mm x 249 mm x 355 mm
For United Kingdom and
Continental Europe
For Australia and N.Z.
+5°C to +35°C
5% to 90% RH (no condensation)
Power consumption in standby mode
For United Kingdom and
Continental Europe
For Australia and N.Z.
Note
without notice.
Mass and dimensions are approximate.
the digital spectrum analyzer.
For Australia and N.Z. The
"HIGH" and "LOW" on the rear or the
speakers refer to High frequency and Low
frequency.
1.9 kg
2.0 kg
125 W
156 W
5.4 kg
5.5 kg
0.6 W
0.7 W
labels
15
2/9/07 11:14:37 AM 2/9/07 11:14:37 AM