The Radio - Panasonic SC-HT17 Operating Instructions Manual

The radio

1 2 3
CH
4 5 6
7 8 9
DIRECT TUNING -/--
>
10
DISC 0
=
Direct tuning
Input the frequency of the station.
Remote control
1. Press [-TUNER/–BAND] to select "TUNER".
2. Press and hold [-TUNER/–BAND] to select "FM" or
"AM".
3. Press [DISC, DIRECT TUNING].
4. Press the numbered buttons to enter the frequency.
e.g. To select 107.90 MHz, press [1]
• If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
• If the frequency has not been input correctly, "ERROR" will be
displayed.
Automatic presetting
The FM stations the unit can receive are preset in channels 1 to
30. The AM stations the unit can receive are preset in channels
21 to 30. (FM stations are replaced if any were preset in these
channels.)
Preparation: Select "FM" or "AM".
Main unit
1. Press [MENU] to select "MEMORY".
2. Press and hold [TUNE 2].
The tuner presets all the stations it can receive into the channels
in ascending order.
If you press and hold [TUNE 1], it starts from the current
frequency.
During automatic presetting, the memory indicator (M) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting
finishes.
To cancel
Press and hold [MENU].
To switch between FM and AM on the main unit
1. Press [MENU] to select "BAND".
2. Press [TUNE 2 or 1] to select "FM" or "AM".
3. Press [MENU].
18
RECEIVER AV SYSTEM
DVD
PLAYER TV
^ ^
ANALOG 6CH
DRIVE DVD - TUNER/
VCR - BAND
SELECT RECORDER
1 2 3
CH
4 5 6
VOLUME
7 8 9
DIRECT TUNING -/--
>
10
DISC 0
=
SKIP SLOW/SEARCH
u i t y
STOP PAUSE PLAY
1
g h q
DIRECT NAVIGATOR FUNCTIONS
TOP MENU
ENTER
SUB MENU/
RETURN
PLAY LIST
Select "TUNER".
TV VOL TV VOL
DVD REC TV
REC REC MODE TV/AV MUTING
- H.BASS/ -LEVEL/
INPUT MODE SUBWOOFER
- C.FOCUS - TEST
TONE/
BALANCE EFFECT /L /R
→ [0] → [7] → [9] →
MENU
INPUT SELECTOR TUNE 2 MENU
2
2
- TUNER/ - TUNER/
- BAND - BAND
Press and hold
Select "FM" or
"AM".
Manual presetting
Preset the stations one at a time.
Preparation: Tune to the station you want to preset.
Main unit
1. Press [MENU] to select "MEMORY".
2. Press [TUNE 2 or 1] to select the channel.
3. Press [MENU] to store.
To cancel
[0]
Press and hold [MENU].
For your reference
FM stations can also be preset in the MONO mode.
Selecting channels
Remote control
Press [ , CH, ].
1 2
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [
e.g. To select channel 21: [
FM mode
You can improve FM reception by switching reception to
monaural.
Main unit
1. Press [MENU] to select "FM MODE".
2. Press [TUNE 2 or 1] to select "MONO".
Select "AUTO" to cancel.
3. Press [MENU].
"MONO" lights.
To change the AM frequency step
If the correct AM frequency cannot be tuned in, change the
frequency step to suit your area.
On the main unit
1. Press [MENU] to select "AM ALLOC".
2. Press [TUNE 2 or 1] to select "9" or "10".
3. Press [MENU].
(The frequency step changes from 9 kHz to 10 kHz.).
VOLUME
%DIGITAL %PL
H. BASS
DOWN
3
TUNE
2
Select the frequency.
Auto tuning starts if you press
and hold the button.
≧ 10, -/--], then the two digits.
≧ 10, -/--] [2] [1]
→ →
UP
PHONES
2