Inserting The Batteries; Using The Remote Control Unit; Cautions Regarding The Remote Control Unit - Sharp LC-26GA5E Operation Manual

Menu operat
ADVANCED
The Ò A DVANCED
feature items for the picture adjustments.
NOTE
¥ Ò A DVANCEDÓ items cannot
eparation
mode is selected.
nserting the batteries
I/P SETUP
Menu Operation: PICTURE Group A (page 9)
ore using the TV for the first time, insert two "AAA" size batteries (supplied). When the batteries become
pleted and the remote control fails to operate, replace the batteries with new "AAA" size batteries.
Adjusting the image and input signal can give you a
more beautiful picture.
Press and slide the battery cover to open it.
Item
Insert two supplied "AAA" size batteries.
INTERLACE: Use this setting when you cannot get
• Place batteries with their terminals corresponding
a clear picture with Progressive . ( E specially
to the (e) and (f) indications in the battery
suitable for media with special effects like game
compartment.
software. )
Close the battery cover.
PROGRESSIVE: Normally, you should select this
setting .
UTION
roper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
o not mix batteries of different types. Different types of batteries have different characteristics.
o not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
MOV. COMP.
akage in old batteries.
(MOVEMENT COMPENSATION)
emove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
hemical leakage, wipe thoroughly with a cloth.
Menu Operation: PICTURE Group A (page 9)
he batteries supplied with this product may have a shorter life expectancy due to storage conditions.
you will not be using the remote control unit for an extended period of time, remove the batteries from it.
The Ò M OV. COMP
( m ovements ) of images on the screen , in order to avoid
artifacts.

Using the remote control unit

e the remote control unit by pointing it towards the remote control sensor. Objects between the remote COMB FILTER
ntrol unit and sensor may prevent proper operation.
Menu Operation: PICTURE Group A (page 9)
Set to Ò O N Ó to reduce the colour interference
with fine details and the picture gets sharper.
NOISE RED. (NOISE REDUCTION)
Menu Operation: PICTURE Group A (page 9)
Select your desired item from the three items of Ò O F
Ò H IGHÓ , or Ò L OWÓ to reduce the nois
a weak signal . Ò N OISE RE
images with minimal dot crawl and cross colour noise.

Cautions regarding the remote control unit

o not expose the remote control unit to shock.
n addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
o not install or place the remote control unit under direct sunlight. The heat may cause deformation of the
nit.
he remote control unit may not work properly if the remote control sensor of the TV is under direct sunlight or
trong lighting. In such case, change the angle of the lighting or TV, or operate the remote control unit closer
o the remote control sensor.
Downloaded From TV-Manual.com Manuals
Menu Operation: PICTURE Group A (page 9)
Set to Ò O NÓ
of the picture.
Menu Operation: PICTURE Group A (page 9)
To adjust your desired screen b
Item
BACKLIGHT
Menu Operation: PICTURE Group A (page 9)
Set to Ò O N
parts of the picture
Menu Operation: PICTURE Group A (page 9)
For viewing a video in monochrom
Menu Operation: PICTURE Group A (page 9)
Adjusts the colour temperature
image.
HIGH: White with bluish tone
LOW: White with reddish ton
30°
30°
Remote
control sensor
Menu Operation: PICTURE Group A (page 9)
To adjust the skin colour during N
Item
NTSC HUE
DYN. CONTRAST
(DYNAMIC CONTRAST)
BACKLIGHT
c Button
The screen dims
DYN. GAMMA (DYNAMIC GAMMA)
MONOCHROME
COLOUR TEMP.
(COLOUR TEMPERATURE)
Item
¥
¥
¥
NTSC HUE
c Button
Skin tones become
purplish
d Button
T
brightens
d Button
Skin tones
greenish