Table of Contents
Advertisement
Preparation
Inserting the batteries
Before using the TV for the first time, insert two "AA" size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new "AA" size batteries.
1 Open the battery cover.
Figure 1: Hold the front part of the
remote control with one hand, pull the
handle tope with another hand.
2 Insert the two supplied "AA" size
batteries.
Place batteries with their terminals
corresponding to the (+) and ( - )
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• Batteries shall not be exposed to excessive heat such as sunshine,fire or the like.
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
16
Figure 2: Place your thumb in the
groove at the bottom.
3 Close the battery cover.
Close the battery cover from top to
bottom.
Figure 3: Pull the handle rope with your
middle and index fingers and use your
thumb to open the battery cover.
Advertisement
Chapters
Table of Contents
