Yamaha NS-P230 Owner's Manual page 8

I Placing the the main/rear speakers (and rear center speaker for
NS-P236)
If you want to mount a speaker on a commercially available speaker stand for the
main/rear speakers (and rear center speaker for NS-P236)
6
E-
Nonskid pad
Mounting
bracket
Screw
60 mm
When placing the speakers on a flat surface, attach the
included nonskid pads to the corners on the bottom of the
speakers as shown on the left. This prevents the speakers
from sliding around.
* For NS-P236, the nonskid pads include four spare ones.
The provided mounting bracket with 1 pair of screw holes
(at an interval of 60 mm) can be used to mount the
speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
1
Attach the bracket to the bottom of the speaker by
using the provided screw so that the convex part of
the bracket fits in the grooved part on the bottom of
the speaker as shown on the left.
2
Mount the speaker on the speaker stand by using the
screw holes on the bracket.
Note
The mounting bracket is provided for each speaker.