Care And Cleaning - Zanussi ZDS 2010S User Manual

Table of Contents

Advertisement

To put the appliance in setting mode, press and
hold the start button until the start indicator
goes off .
Starting a programme without delay start
1. Open the water tap.
2. Close the appliance door.
3. Turn the programme knob until the pro-
gramme marker is aligned with the pro-
gramme you want to set. The on/off indica-
tor comes on.
4. Press the start button, the programme
starts. The start indicator comes on.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button to delay the start of
the programme of 3 hours. The delay indica-
tor comes on.
3. Press the start button, the countdown starts.
The start indicator comes on.
• When the countdown is completed, the pro-
gramme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops. When
you close the door, the appliance continues
from the point of interruption.
Cancelling the delay start while the
countdown operates
1. Press and hold the start button until the start
indicator and the delay indicator go off.

Care and cleaning

Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
www.zanussi.com
2. Press the start button, the programme
starts. The start indicator comes on.
Cancelling the programme
Press and hold the start button until the start in-
dicator goes off .
Make sure that there is detergent in the de-
tergent dispenser before you start a new
programme.
At the end of the programme
When the programme is completed, the end in-
dicator comes on. If you do not deactivate the
appliance within 3 minutes, only the on/off indi-
cator stays on. This helps to decrease energy
consumption.
1. Deactivate the appliance. Turn the pro-
gramme knob until the programme marker is
aligned with the on/off indicator.
2. Close the water tap.
Important
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
can be easily damaged.
• First remove the items from the lower basket,
then from the upper basket.
• There can be water on the sides and on the
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
Cleaning the filters
1
C
B
A
2
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zds 2010

Table of Contents