Hints And Tips - Zanussi ZDS 2010S User Manual

3
To remove filters (B)
and (C), turn the han-
dle counterclockwise
and remove. Pull
apart filter (B) and
(C). Wash the filters
with water.
D
A
5
Before you put the fil-
ter (A) back, make
sure that there are no
residues of food or
soil in or around the
edge of the sump.
Make sure that filter
(A) is correctly posi-
tioned under the 2
guides (D).

Hints and tips

The water softener
Hard water contains a high quantity of minerals
that can cause damage to the appliance and
bad washing results. The water softener neutral-
ises these minerals.
The dishwasher salt keeps the water softener
clean and in good conditions. It is important to
set the right level of the water softener. This
10
A
4
Remove filter (A).
Wash the filter with
water.
6
Assemble filters (B)
and (C). Put them
back in filter (A). Turn
the handle clockwise
until it locks.
An incorrect position of the filters can
cause bad washing results and damage to
the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged, re-
move remaining parts of soil with a thin pointed
object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or sol-
vents.
Internal cleaning
If you regularly use short duration programmes,
these can leave deposits of grease and lime-
scale inside the appliance.
To prevent this, we recommend to run long du-
ration programmes at least 2 times per month.
makes sure that the water softener uses the
correct quantity of dishwasher salt and water.
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for
dishwasher. Other products can cause dam-
age to the appliance.
www.zanussi.com