Table of Contents
Advertisement
Programmes
1)
Programme
70º
65º
65º
2)
A30'
ECO
50º
3)
4)
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes
can change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
Before first use
1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
www.zanussi.com
Degree of soil
Type of load
Heavy soil
Crockery, cutlery,
pots and pans
Normal soil
Crockery and cut-
lery
Fresh soil
Crockery and cut-
lery
Normal soil
Crockery and cut-
lery
All
Programme pha-
ses
Prewash
Wash 70 °C
Rinses
Dry
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
Duration
Energy
(min)
(kWh)
65 - 75
1.5 - 1.7
100 - 110
1.4 - 1.5
30
0.8
123
0.86
11
0.1
Water
(l)
18 - 20
18 - 20
8
13
5
5
Advertisement
Table of Contents
