Yamaha MY4-AEC Owner's Manual page 14

Meeting Room (Near End)
OUT
(Analog)
3
Make the required virtual connections in the DME Designer configuration
window.
• Connect the signals from microphone inputs 1 – 4 to the "Near-end Mic. 1" – "Near-end
Mic. 4" inputs on the AEC component.
• Place an oscillator that will be used for AEC adjustment in the configuration window and
connect it to the AEC component "From Far-end A" input.
• The "Far-end voice A" output is connected to the conference room speakers (SP 1 and
SP 2) in parallel.
14
MY4-AEC Owner's Manual
Speaker 1
Speaker 2
DME24N
+
MY4-AEC
IN (Analog)
Microphone 1
Microphone 2
Microphone 3
Microphone 4