Cds - Panasonic SC-VK31 Operating Instructions Manual

CDs

CD selection
Disc type Logo
Video CD
(version 1.1)
Video CD
(version 2.0)
CD
—
\ \ \ \ \ PBC (Playback control)
PBC is a signal recorded on version 2.0 CDs that enables you to
control playback. It makes video enjoyment more interesting by allowing
you to interact with the system via menus, search functions or other
typically computer-like operations.
Do not:
•
use irregularly shaped CDs.
•
attach extra labels and stickers.
•
use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.
•
attach scratch proof covers or
any other kind of accessory.
•
write anything on the CD.
•
clean CDs with liquids. (Wipe
with a soft, dry cloth.)
•
use CDs printed with label
printers available on the market.
To prevent damage
Always observe the following points:
•
Load only 1 CD on the tray.
•
Load CDs as shown in the figure.
An adaptor is not needed with 8 cm CDs (singles).
8 cm CD
12 cm CD
•
Set the system on a flat, level surface.
•
Always unload all CDs before moving the unit.
•
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
Do not:
•
set the unit on top of magazines, inclined surfaces, etc.
•
move the unit while a tray is opening/closing, or when loaded.
•
put anything except a CD in the tray.
•
use cleaning CDs or CDs which are badly warped or cracked.
•
disconnect the AC power supply cord from the household AC outlet
during disc changing operation.
This unit can play CD-DA (digital audio), MP3 and video CD format
CD-R and CD-RW that have been finalized (a process that enables
players to play CD-R and CD-RW) upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
6
RQT7703
Indication in these
operating instructions
VCD 1.1
Operated in the same way as audio
CDs, these CDs allow playback of
video pictures as well as sound, but
they are not equipped with PBC\.
VCD 2.0
Equipped with PBC\, these CDs allow
playback of menus on the TV screen
as well as high resolution still pictures.
You can use functions described for
video CD version 1.1 by turning
PBC off (see page 7)
CD
MP3
Discs recorded with MP3
XXXX XXXX XXXXX XXXX XX
XXXX XXXX XXXXX
XXXX XXXX XXXXX
XXXX XXXX
XXXXXX XXX XXXXXXX
XXXX XX XXXXX
XXXX XX XXXXX XXXX XX XXXXX
XXXX XXXX XXXXX XXXX XXXX XXXXX
Basic play
VCD 2.0
You can use menus displayed on the TV screen to control playback
when running interactive software.
VCD 2.0 VCD 1.1
Preparation:
Turn the television on, select video input with the television input switch.
1
Press [c OPEN/CLOSE] to open the tray.
The unit comes on.
2
Set a CD in the tray.
(Label must face upward.)
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c OPEN/
CLOSE] to open the tray.
Press [c OPEN/CLOSE] to close the tray.
3
Press [1]–[5] to select the desired disc.
(Alternatively, you can press [:/J CD] if the current disc is your
desired CD.)
VCD 1.1 CD
The track number and its elapsed playing time are shown.
VCD 2.0
The menu screen appears on the TV (with some discs, it may not
appear immediately). The menu screens that appear may differ
depending on the disc.
Some software may display the menu screen after animated or
still screens have been played.
VCD 2.0
4
Press the numbered buttons on the remote control to
select the menu item.
To select 1–9, press the corresponding numbered button.
To select a two-digit number, press [h10], and then the two numbers
you want.
For example:
Menu item 10 : [h10] [1]
Menu item 25 : [h10] [2]
A different menu is displayed or animated/still screens are played.
High-precision still screens are also automatically distinguished
and played.
Use the CD Play Mode function's ALL-DISC mode to play CDs in
succession. ( A page 8) (
CD
VCD 1.1
To stop
Press [L STOP].
The total number of tracks and total playing time are shown.
To pause
Main unit: Press [:/J CD] during play.
VCD 1.1 CD MP3
Remote Control: Press [ J PAUSE]
VCD 2.0 VCD 1.1 CD MP3
Press [:/J CD] on the main set or [: CD] on the remote control to
resume play.
" " indication
It indicates current disc has 16 or more tracks.
One touch play
During standby mode and when a CD is loaded, press [:/J CD] or
[1]–[5].
The unit comes on and play starts.
Current disc indicator
[0]
[5]
A page 11)
MP3
during play.