Specifications; Maintenance - Panasonic SA-HE100 Operating Instructions Manual

Specifications

I AMPLIFIER SECTION
Rated minimum sine wave RMS power output
40 Hz–20 kHz both channels driven
0.9 % total harmonic distortion
1 kHz continuous power output both channels driven
0.05 % total harmonic distortion
Total harmonic distortion
rated power at 40 Hz–20 kHz
half power at 1 kHz
Power output at 1kHz each channel driven
0.9 % total harmonic distortion
Front (L, R)
Center
Surround (L, R, BACK)
Low frequency damping factor
Load impedance
Front (L, R)
A or B
A and B
Center
Surround (L, R, BACK)
Dynamic headroom
Frequency response
PHONO
CD, TAPE, DVD, TV, VCR 1/VCR 2
Input sensitivity
PHONO
CD, TAPE, DVD, TV, VCR 1/VCR 2
S/N (IHF A)
PHONO
CD, TAPE, DVD, TV, VCR 1/VCR 2
DVD 6CH
Input impedance
PHONO
CD, TAPE, DVD, TV, VCR 1/VCR 2
Tone controls
BASS
TREBLE
Subwoofer frequency response (–6 dB)
Digital input
Optical
Coaxial
Digital output
Optical
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending.
"DTS", "DTS-ES Extended Surround" and "Neo:6" are
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
(IHF'78)
100 W per channel (6 )
105 W per channel (6 )
0.9 % (6 )
0.07 % (6 )
100 W (6 )
100 W (6 )
100 W (6 )
30 (6 )
4–8
6–8
6–8
2 dB (6 )
RIAA standard curve ±0.8 dB
10 Hz–70 kHz, ±3 dB
0.4 mV (3 mV, IHF '66)
27 mV (200 mV, IHF '66)
70 dB (80 dB, IHF '66)
75 dB (85 dB, IHF '66)
100 dB (IHF A, Rated Power, S=2V)
85 dB (94 dB, IHF '66)
47 k
22 k
50 Hz, +10 to –10 dB
20 kHz, +10 to –10 dB
7–200 Hz
I FM TUNER SECTION
Frequency range
Sensitivity
50 dB quieting sensitivity
MONO
STEREO
Total harmonic distortion
MONO
STEREO
S/N
MONO
STEREO
Frequency response
Alternate channel selectivity
Capture ratio
Image rejection at 98 MHz
Spurious response rejection at 98 MHz
AM suppression
8 Stereo separation
1 kHz
10 kHz
Antenna terminal
I AM TUNER SECTION
Frequency range
Sensitivity
Selectivity
IF rejection at 1000 kHz
I VIDEO SECTION
Output voltage at 1 V input (unbalanced)
Maximum input voltage
Input/output impedance
I GENERAL
Power supply
Power consumption
Dimensions (W x H x D)
Mass
Power consumption in standby mode:
3
1
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
1
2. Total harmonic distortion is measured by the digital spectrum
analyzer.

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
¡Never use alcohol, paint thinner or benzine to clean this unit.
¡Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
87.9–107.9 MHz
11.2 dBf (2 µV, IHF '58)
18.3 dBf (4.5 µV, IHF '58)
38.3 dBf (45 µV, IHF '58)
0.2 %
0.3 %
73 dB
67 dB
20 Hz–15 kHz, +1 dB, –2 dB
65 dB
1.5 dB
40 dB
75 dB
50 dB
40 dB
30 dB
75 (unbalanced)
530–1710 kHz
20 µV, 330 µV/m
55 dB
50 dB
1±0.1 Vp-p
1.5 Vp-p
75
AC 120 V, 60 Hz
450 VA, 350 W
430 x 158 x 370 mm
(16-15/16'' x 6-7/32'' x 14-19/32'')
10.5 kg (23.1 lb.)
1 W
17
RQT6208