Equipment Connections; Step - Panasonic SA-HE100 Operating Instructions Manual

Step

1
Stereo connection cable
Optical fiber cable
Note
¡Do not bend the optical fiber cable.
¡Turn off all components before making any connections.
¡Use digital connection to enjoy Dolby Digital or DTS and record
digital sources ( \ pages 10 and 15).
¡Use analog connection to enjoy sources that cannot be decoded
on this unit and record analog sources ( \ pages 10 and 15).
TV, VCR and DVD player
DIGITAL AUDIO OUT
L
R
Satellite receiver
etc.
or
DIGITAL OUT
6
RQT6208
2

Equipment connections

3 4
White (L)
Red (R)
DVD player
DVD/DVD 6CH
or
DVD/DVD 6CH
S-VIDEO
VIDEO
L
R
S-VIDEO
VIDEO
Video connection cable
Coaxial cable
Changing the digital input settings
You can change the input settings for the digital
terminals if necessary. Note the equipment you have
connected to the terminals, then change the settings
( \ pages 8 and 9).
AUDIO OUT
(SURROUND L, R)
AUDIO OUT
(CENTER, SUBWOOFER)
S-VIDEO OUT
VIDEO OUT
AUDIO OUT
(FRONT L, R)
Note
Connect to FRONT L, R if your DVD player
does not have 6 channel output.
A
R L
BACK R L R B L
VCR
S-VIDEO OUT
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
S-video connection cable
Video
There are three types of
connections:
COMPONENT, S-VIDEO,
and VIDEO (composite).
Video input can only be
output again through the
same type of terminal.
COMPONENT
This connection provides
high quality pictures by
separating the color (P
and P ) and the luminance
R
(Y) signals.
S-VIDEO
Use this connection for
better picture quality than
with the VIDEO terminals.
VIDEO
This is the most basic
video connection.
TV or
monitor
S-VIDEO OUT
S-VIDEO IN
VIDEO IN
VIDEO OUT
AUDIO OUT
L
R
B