Short Description; Display Area / Display; Resetting The Display; Type Of Pulse Measurement - Kettler 7670-700 Training And Operating Instructions

Short description

The electronic unit consists of function keys and a display.

Display area / Display

Display values
The illustrations show the oparation as wheel
ergometer
If the rotation speed corresponds to the
example values om the display, the values for
speed and distance at cross ergometers are
lower
At a pedal rate of 60 rpm:
Wheel ergometer = 21,3 km/h
Race ergometer = 25,5 km/h
Cross-Ergometer = 9,5 km/h
Keys Pulse female connector
Turning the device ON and OFF
Start the display in standby mode with the navigation but-
ton "up".
Soft buttons
These 4 buttons trigger features which will be shown in the
display above, e.g. menu, persons ...
Navigation keys
Use the navigation keys to select menu features or menu entry
fields.
USB-A
Enter keys minus - / plus +
By means of these keys, you can alter values, adjust the stress
values for training and shift profiles.
• "Plus" increases the values or alters settings
• "Minus" reduces the values or alters settings
• Press "Plus" or "Minus" for a longer period of time > quick
modification
• Press "Plus" and "Minus" at the same time:
• Stress skips to
• Programmes skips to
• Value input skips to
Resetting the Display (Software-Reset)
Pressing the three keys at the same
time, will restart the equipment.

Type of pulse measurement

The pulse measurement can be carried
out in two ways:
1. Ear clip
The plug is put into the pulse female connector;
2. built-in receiver and Polar chest strap T34 (please refer to
the appropriate instructions)
USB type A connector
Connector for storage media. The storage requires a FAT32
format.
USB type B connector
Connector to the pc is located at the rear side of the
display.

Selecting Language

When switched on for the first time, the language menu.
Use navigation keys "Up" and "Down" to select language.
Press "Select" to accept language selection and to open the
"Display" menu.
Press "Cancel" to get back to the main menu. Settings will not
be saved, display will be shown when switched on again.

Display Settings

smallest performance After having set the language, the menu for setting the
brightness, the contrast and the background colour of the dis-
default setting
play appears.
Off
Press "Back" to get back to the main menu. The settings will
be saved.
Press "Cancel" to get back to the main menu instantly. Settings
will not be saved, display will be shown when switched on
again.
Constrast and Brightness
When the optimal contrast is set, there will be no heavy sha-
des.
Colour
Here you can change the background colour of the display.
21
GB