Adjusting Sfc (Sound Field Control) - Panasonic SA-XR59 Operating Instructions Manual

Adjusting SFC (Sound Field Control)

Adjusting the output level
LEVEL
Press to select the speaker you want to adjust, then press
C (center), RS (surround right), SBR (surround back right), SBL (surround back left), (SB when you have connected only one
surround back speaker), LS (surround left)
Adjustment range: -20 dB to +10 dB
Factory setting: 0 dB
SUBW (Subwoofer)
Adjustment range: --- (off), MIN (minimum), 1 to 29, MAX (maximum)
Factory setting: 20
Adjusting the effect level
EFFECT
Press , then press
Adjustment range: EFFECT 1 (minimum) to EFFECT 10 (maximum)
Factory setting: EFFECT 5
You cannot adjust the effect level in the "PARTY" mode (
Note
• In "PARTY" mode, you can only adjust the subwoofer output level (
• You can only adjust speakers if you have connected them (
27).
• You may be unable to use some of these surround effects with some sources.
• These settings are saved even if you turn the unit off.
• You cannot use SFC modes unless you have connected center or surround speakers.
When in "PARTY" mode and you have connected a single surround back speaker (the left surround back speaker), there will be no sound from
•
that speaker unless you have also connected a center speaker. Similarly, there will be no sound from your center speaker unless you have also
connected a surround back speaker (the left surround back speaker).
• There may be some distortion with some input sources and modes. Reduce the effect level (
to adjust the level.
page 24).
➡
page 17).
➡
pages 13, and 14 to 17) and set them as present ("Speaker and size settings",
➡
to adjust the level.
above), or choose another mode.
➡
page
➡
RQTV0247
25