Surround Sound; Dolby Pro Logicιιx; Adjusting The Dolby Pro Logicιιx "Music" Mode - Panasonic SA-XR59 Operating Instructions Manual

Surround sound

There are various modes you can use to add surround effects or play stereo through more than just the normal two speakers.
RECEIVER
AV
SYSTEM
RECORDER
TV
TUNER
CD VCR
BAND
0
DIRECT
TUNING
DISC -/--
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT MANUAL SKIP
ENTER
SUB MENU
SUBWOOFER
OFF DIMMER
LEVEL EFFECT
NEO:6
SFC AUTO
MUSIC MOVIE TEST
Note
• You may be unable to use
some of these surround
effects with some sources.
• These settings are saved
even if you turn the unit off.
RQTV0247
22
Dolby Pro LogicΙΙx
• This feature adds surround effects to stereo sources.
• It can also expand 5.1-channel Dolby Digital and DTS so that you can hear them through 7.1
channels (when you have connected 2 surround back speakers) or 6.1 channels (when you
DVD
have connected 1 surround back speaker).
PLAYER
• Use this mode when playing Dolby Digital Surround EX to make effective use of the
BD/DVD
surround back channel.
ANALOG 6CH
Press to select one of the following modes.
CH
VOLUME
(Movie)
(Music)
(Dolby Digital EX)
RETURN
(Game)
TV
VOL
To cancel, press OFF
TV/AV
Adjusting the Dolby Pro LogicΙΙx "MUSIC" mode
MUTING
You can make the following adjustments in stereo sources.
(Dimension Control)
(Center Width Control)
(Panorama)
Use this mode when playing movie software, especially if it is recorded in
Dolby Surround.
If you have connected two surround back speakers, their output will be in
stereo.
This is the factory setting.
This mode is effective on music sources.
Use this mode when playing movie software, especially if it is recorded in
Dolby Digital EX format.
It is effective on multi-channel sources.
If you have connected two surround back speakers, output from them will
be monaural.
• If you have connected one surround back speaker, the "
indicator goes out and either "
Enjoy gaming with more impact.
This mode is effective on stereo sources.
You cannot use this mode unless you have connected both surround
speakers and surround back speakers (
sure you have also set these speakers as present in "Speaker and size
settings" ( page 27).
➡
You can make up for differences in the output level of the front and
surround speakers.
EFFECT
Press to select "DIMEN", then press
adjust the level.
Adjustment range: -3 (emphasis on the surround speakers) to +3
(emphasis on the front speakers)
Factory setting: 0
This is an overall adjustment for the front and center speakers to achieve a
more natural sound.
EFFECT
Press to select "C-WIDTH", then press
adjust the level.
Adjustment range: 0 (for a distinct center) to 7 (for a broad center)
Factory setting: 3
This mode spreads sound out to envelope you in music.
EFFECT
Press to select "PANORAMA", then press
to select "ON" or "OFF".
Factory setting: OFF
PLΙΙx"
DIGITAL EX" or " EX" lights instead.
pages 13 and 14 to 17). Make
➡
to
to