Operating Other Equipment; Operating The Television; Operating The Cable Tv Box, Digital Broadcasting Or Satellite Receiver - Panasonic SC-HT855 Operating Instructions Manual

HT855En.book Page 33 Tuesday, March 7, 2006 2:33 PM

Operating other equipment

TV
TV/AV
FUNCTIONS
SUBWOOFER LEVEL

Operating the television

You can use the remote control to operate a Panasonic television.
Connect your equipment referring to "Cable TV box or video cassette
recorder connection" (➜ page 9).
[Note]
The remote control may not work properly with some models.
Aim the remote control at the television.
Turning the television on/off
Press [Í TV].
Switching the television's video input mode
Press [TV/AV].
Adjusting the volume
Press [r, s TV VOLUME].
To play audio from your television through your home theater
system
Press [EXT-IN] to select "TV" or "AUX" as the source, reduce the volume
on the television to its minimum, and control the volume on the main unit.
Each time you press the button:
MUSIC P.----.TV----.AUX
^"""" D-IN(---_}
≥ You can enjoy 5.1-channel surround sound when you turn on Sound
Field Control (MOVIE, SPORT or MUSIC) (➜ page 30).
,
TV VOLUME
This unit can decode the surround signals received through cable TV box,
EXT-IN
digital broadcasting or satellite broadcasts. Refer to your equipment's
ONE TOUCH PLAY
operating instructions for details. Only Dolby Digital and PCM can be
played with this connection.
To DIGITAL OUT
Press [EXT-IN] several times to select "D-IN" (Digital In) as
the source.
PL
≥ Main unit: Press [SELECTOR] several times.
PLAY MODE
When you select "D-IN" as the source, you can select the following
sound effects. (These functions only work with Dolby Digital or PCM,
excluding Audio Mode, which only works with Dolby Digital Dual Mono.)
PCM FIX Mode
Press and hold [FUNCTIONS].
PFIX ON: Select when receiving only PCM signals.
PFIX OFF (factory preset): Select when receiving Dolby Digital and PCM
Dynamic Range Compression
Press and hold [SUBWOOFER LEVEL].
DRC ON: Adjusts for clarity even when the volume is low by compressing
DRC OFF (factory preset)
Audio Mode
Press and hold [PLAY MODE].
AUDIO ST, AUDIO L, AUDIO R ("AUDIO L" and "AUDIO R" only appear
when the signal is Dolby Digital Dual Mono.)
Dolby Pro Logic II (➜ page 30)
Press [ÎPLII].
[Note]
Audio that is input through the OPTICAL IN terminal cannot be output
through the HDMI terminal.
Operating the cable TV box, digital
broadcasting or satellite receiver
Optical digital audio cable (not included)
≥ Do not bend sharply when connecting.
signals.
the range of the lowest sound level and the highest sound level.
Convenient for late night viewing. (Only works with Dolby
Digital)
Back of the main unit
OPTICAL IN
33