Audio Menu - Panasonic SC-HT855 Operating Instructions Manual

HT855En.book Page 22 Tuesday, March 7, 2006 2:33 PM
Using on-screen menus
Other Settings
∫ Picture Menu
(Continued)
If you have chosen "xxx
(interlace) (➜ page 21, "Video Output Mode" in Picture
Menu), select the method of conversion for progressive
output to suit the type of material.
≥ The setting will return to Auto or Auto1 when the disc
tray is opened, the unit is turned off or another source
is selected.
When playing PAL discs, MPEG4 or DivX video
contents
Auto:
Video:
Transfer
Cinema: Select this if the edges of
Mode
When playing NTSC discs
Auto1: Automatically detects the film and video
content, and appropriately converts it.
Auto2: In addition to Auto1, automatically detects film
contents with different frame rates and
appropriately converts it.
Video: Select when using Auto1 and Auto2, and the
content is distorted.
When you select "Auto" the constructing method of the
DivX contents is automatically distinguished and
Source
output. If the picture is distorted, select "I (Interlace)" or
Select "P (Progressive)" depending on which constructing
[DivX] method was used when the contents were recorded to
disc.
Auto, I (Interlace), P (Progressive)
This works when the HDMI connection is being used
and "Video Output" (➜ page 26, "HDMI" tab) is set to
"On".
HD Picture
Enhancer
To sharpen the "720p" and "1080i" picture quality
Off,------. 1,------.2,------.3 (sharpest picture)
^------------------------------------J
This works when the HDMI connection is being used
and "Video Output" (➜ page 26, "HDMI" tab) is set to
"On".
To select suitable picture colour with your
television
HDMI
RGB
Colour
YC C
b r
Space
YC C
b r
≥ If the setting above is not compatible with your
television, it will not be displayed.
≥ "RGB Range" (➜ page 26, "HDMI" tab) is available
when "RGB" is selected.
22
§
p" (progressive) or "1080i"
Automatically detects the film and video
content, and appropriately converts it.
Select when using Auto, and the content is
distorted.
the film content appear
jagged or rough when Auto
is selected.
However, if the video
content is distorted as shown in the
illustration to the right, then select Auto.
(4:4:4)
(4:2:2)
Items shown differ depending on the type of disc.

∫ Audio Menu

➜
( page 30, Enhancing the stereo sound:
Dolby Pro Logic II
Dolby Pro Logic II)
To make the dialogue in movies easier to
hear
[DVD-V] (Dolby Digital, DTS, MPEG, 3-channel
or higher, with the dialogue recorded in the
Dialogue Enhancer
center channel)
[DivX] (Dolby Digital, 3-channel or higher, with
the dialogue recorded in the center channel)
On ,------. Off
To enjoy comfortable, analog-like sound
[DVD-VR] [DVD-V] (Discs recorded with 48 kHz
only)
[WMA] [MP3] (Disc recording is other than
8 kHz, 16 kHz or 32 kHz)
Sound
[VCD] [CD]
Enhancement
On ,------. Off
≥ This may have no effect depending on the
disc's recording.
≥ This does not work with MP3 on DVD-RAM
or DVD-R/RW.