Replacing The Filters - Siemens DW03500 pureFlow Instructions For Use Manual

Remove the drainage hose (28) and close the
■
opening with the red safety lock cap (27a).
Slide the sliding door (27) upward.
■
Open the water supply again. Insert the appli-
■
ance's electrical plug in the electrical socket and
switch the On/Off switch (14) to I.
Press the selection button
■
Replacing the filters
The individual filters must be replaced after a cer-
tain time period has elapsed. Replacement of the
respective filter is indicated by flashing of various
LED combinations:
LED LED
Hot water Cold water
(flashes) (lights up)
en
(Cold water).
Filter to be replaced
Neo-Sense Filter
(Filter No. 1)
Order number BZ00NS1
RO Membrane Filter
(Filter No. 2)
Order number BZ00RO1
Post-Carbon Block Filter
(Filter No. 3)
Order number BZ00PC1
Only our customer service department is permitted to replace the
UV filter. Please call customer service.
It will take about 2 hours until all three tanks are
refilled.
The appliance is ready to operate when both LED in-
dicators "Hot water"(17) and "Cold water"(18) light
up completely.
Important:
The filter must be replaced as soon as the filter
change reminder is displayed. The device must not
be operated with a used filter.
The filter can be disposed of in the normal house-
hold waste.
Service life (based on 10 l
water extracting quantity
per day)
every 6 months
every 20 months
every 18 months
39