Miele PG 8052 Operating Instructions Manual page 9

~
In critical applications where very
stringent requirements have to be met,
it is strongly recommended that all the
relevant factors for the process, such
as cleaning agent, water quality etc.
are discussed with the Miele Applicati-
on Technology specialists.
~
Do not allow any remains of acids or
solvents, and in particular hydrochloric
acid or chloride solutions, to get into
the wash cabinet. Similarly avoid any
materials with a corrosive effect.
The presence in compounds of any sol-
vents should be minimal (especially
those in hazard class A1).
~
To avoid any corrosion damage, en-
sure that solutions or steam containing
hydrochloric acid do not come into con-
tact with the steel outer casing.
~
Never clean the dishwasher or near
vicinity with a water hose or a pressure
washer.
~
Do not sit or lean on an open door.
This could cause the dishwasher to tip
up and be damaged or cause an injury.
~
Be careful when sorting items with
sharp pointed ends and positioning
them in the dishwasher that you do not
hurt yourself or create a danger for ot-
hers. Sharp knives, forks etc. should be
placed in baskets with the pointed ends
facing downwards.
Warning and safety instructions
~
When using this dishwasher in the
higher temperature ranges be especial-
ly careful not to scald or burn yourself
when opening the door. Baskets and in-
serts must be allowed to cool down be-
fore they are unloaded. Any water re-
maining in containers could still be very
hot. Empty them into the wash cabinet
before taking them out.
~
Do not touch the heating elements
or the heated surfaces on the wash ca-
binet floor during or directly after the
end of a programme. You could burn
yourself. They remain hot for some time
after the end of the programme.
~
Empty any containers or utensils be-
fore loading them in the dishwasher.
9