Problem solving guide
Problem
The "Water inlet" indica-
tor light is flashing and
the programme does not
continue.
52
Possible cause
The stopcock is closed.
The water inlet filter is
blocked.
The water pressure at the
intake is lower than
0.3 bar.
Remedy
Before rectifying the pro-
blem you must:
– Press the "Start/Stop"
button for at least one
second.
– Start the programme
again.
Open the stopcock fully.
Before rectifying the pro-
blem you must:
– Press the "Start/Stop"
button for at least one
second.
– Switch the dishwasher
off using the "On/Off"
button.
Then:
– Clean the water inlet fil-
ter, see "Cleaning the
water inlet filter".
Seek professional advice.