Enabling Ppp Accounting; Configuring The Nas-Port-Type Attribute - HP MSR Router Series Wan Access Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Enable PPP LQM.
4. Configure the interface to
periodically send LCP echo
packets when LQM detects a
low quality link.

Enabling PPP accounting

PPP accounting collects PPP statistics, including the numbers of received and sent PPP packets and bytes.
AAA can use the PPP statistics for accounting. For more information about AAA, see Security
Configuration Guide.
To enable PPP accounting:
Step
1. Enter system view.
2. Enter interface view.
Enable PPP accounting.
3.

Configuring the nas-port-type attribute

The nas-port-type attribute is used for RADIUS authentication and accounting. For information about the
nas-port-type attribute, see RFC 2865.
To configure the nas-port-type attribute:
Step
1. Enter system view.
2. Enter VT interface view.
3. Configure the nas-port-type
attribute.
Command
system-view
interface interface-type interface-number
ppp lqm close-percentage
close-percentage [ resume-percentage
resume-percentage ]
ppp lqm lcp-echo [ packet size ]
[ interval seconds ]
Command
system-view
interface interface-type
interface-number
ppp account-statistics enable [ acl
{ acl-number | name acl-name } ]
Command
system-view
interface virtual-template number
nas-port-type { 802.11 | adsl-cap
| adsl-dmt | async | cable |
ethernet | g.3-fax | hdlc | idsl |
isdn-async-v110 |
isdn-async-v120 | isdn-sync |
piafs | sdsl | sync | virtual |
wireless-other | x.25 | x.75 |
xdsl }
19
Remarks
N/A
N/A
By default, PPP LQM is
disabled.
By default, the interface does
not send LCP echo packets
when LQM detects a low
quality link.
Remarks
N/A
N/A
By default, PPP accounting is
disabled.
Remarks
N/A
N/A
By default, the nas-port-type
attribute is determined by the
service type and link type of the
PPP user (see Table 1).