Panasonic DP-C406 Operating Instructions Manual page 37

3
Pull out the Stapler Unit.
4
Pull out the Staple Cartridge by
pinching the green buttons.
Staple Cartridge
5
Remove the Staple Case (empty).
Press both sides.
Staple Case (empty)
Press each side of the Cartridge, and then
remove the cover.
Stapler Unit
6
Set the Staple Case (new).
Staple Case (new)
Slide the new Staple Case into the Staple
Cartridge, and then push the cover to close.
7
Remove the tape.
8
Insert the Staple Cartridge.
Staple Cartridge
Insert it all the way in until it locks.
Tape
37