Sound Effects; Using The Auxiliary Input; Others - Panasonic SC-PMX9 Operating Instructions Manual

Play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
"TIMER Adjust".
2
Within 8 seconds, press [3, 4] to set the start
time.
3
Press [OK].
4
Do steps 2 and 3 again to set the end time.
To start the timer
1
Prepare the audio source you want to listen to
and set the volume.
2
Press [F, PLAY].
"F" is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to
operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select "TIMER
Adjust".
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
14
14

Sound effects

Changing the sound quality
1
Press [SOUND] to select a sound effect.
2
Press [2, 1] to select the desired setting.
BASS
-4 to +4
TREBLE
Surround "On Surround" or "Off Surround"
By main unit only
Turn [BASS] or [TREBLE] to adjust the level.
Preset EQ
Press [PRESET EQ] to select a setting.
Heavy Adds punch to rock
Soft For background music
Clear Clarifies higher frequencies
Vocal Adds gloss to vocal
Flat Cancels the sound effect
D.BASS
This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select "On D.BASS" or "Off
D.BASS".

Using the auxiliary input

You can connect a VCR, DVD player etc. and listen to
the audio through this system.
Preparation
Connect the external equipment.
1
Press [SELECTOR] repeatedly to select "AUX".
2
Play the external equipment.

Others

Decrease the brightness of the display panel
1
Press [SETUP] to select "Dimmer".
2
Press [2, 1] to select "On" and then press [OK].
Note:
• To cancel, select "Off" in step 2.
Automatically switch off the system
This function switches off the system (except in radio
source) if you do not use the system for approximately
20 minutes.
1
Press [SETUP] repeatedly to select "Auto Off".
2
Press [2, 1] to select "On" and then press [OK].
Note:
• To cancel, select "Off" in step 2.
• When connected to a Bluetooth ® device, this function does
not work.
• If "Net Standby" is set to "On", this function will also be set
to "On". To change the setting, set "Net Standby" to "Off".
( 15)
Software update
Occasionally, Panasonic may release updated software
for this system that may add or improve the way a
feature operates. These updates are available free of
charge.
DO NOT DISCONNECT the AC mains lead while
one of the following messages is displayed.
– "Linking", "Updating" or " %"
(" " stands for a number.)
• During the update process, no other operations can be
performed.
Preparation
• Turn this system on.
• Connect this system to the home network. (
– Make sure that the network is connected to the
Internet.
– If "D.Connect" is set to "On", change the setting to
"Off" and connect this system to a network that is
connected to the Internet.
6)