Repeat Or Loop A Sequence; Index Marks; Adding Index Marks; Switching To Index Marks - Philips DVT1300 User Manual

6.5.2 Repeat or loop a sequence
1
During playback, press the menu key ` to specify the sequence start
point.
The symbol à is shown on the display.
X
2
Press the menu key ` again to specify the sequence end point.
The repeat sequence begins.
X
3
Press the menu key ` to end repeating of the sequence and resume
normal playback.
6.6 Index marks
Index marks can be used to mark certain points in a recording as points of
reference.
6.6.1 Adding index marks
1
In playback mode, press the INDEX key to add an index mark.
and the index mark number appears briefly on the display.
X
INDEX
Up to 10 index marks can be added per file.
if 10 index marks were set.
Tip
• You can also set index marks while the playback is paused.
Table of contents
6.6.2 Switching to index marks
1
2
3
4
5
6.6.3 Deleting an index mark
1
2
3
4
will be displayed
Index full
5
In playback mode, press the INDEX key for approximately one second.
Press h / b to select
Go to index
Press the record key g to confirm.
A list of all index marks is displayed.
X
Press h / b to select the desired index mark.
Press the record key g to confirm.
In playback mode, press the INDEX key for approximately one second.
Press h / b to select
Delete index
Press the record key g to confirm.
A list of all index marks is displayed.
X
Press h / b to select the desired index mark.
Press the record key g to confirm.
.
Playback
25