Enabling/Disabling Voice-Activated Recording - Philips DVT1300 User Manual

8.1.5 Enabling/disabling voice-activated recording
If voice-activated recording is enabled, recording will start when you begin
speaking. When you stop speaking, the device will automatically pause
recording after three seconds of silence and resume once you begin
speaking again.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the record settings menu Ó.
3
Press the record key g to confirm.
4
Press h / b to select
Voice Activation
5
Press the record key g to confirm.
6
Press h / b to select
.
On
7
Press the record key g to confirm.
If this feature is enabled, the Š symbol is displayed.
X
8
To turn off voice activation, press h / b and select
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
Table of contents
.
.
Off
8.1.6 Setting auto divide
You can automatically split large recordings, such as a multi-hour meeting
recording. Once the set time has been reached, the device stops the
current recording and automatically starts a new one.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the record settings menu Ó.
3
Press the record key g to confirm.
4
Press h / b to select
Auto divide
5
Press the record key g to confirm.
6
Press h / b, to select whether longer recordings are to be
automatically divided after 30 or 60 minutes, or switch the feature off.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
.
Settings
31