To Set The Timer; Auto Restart Control - Panasonic CU-HZ9RKE-4 Operating Instructions Manual

Hide thumbs Also See for CU-HZ9RKE-4:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

To adjust airfl ow direction
AIR SWING
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the fl aps
swings left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal
fl ap is fi xed at the predetermined position.
The vertical fl ap swings left/right after the
temperature rises.
• Do not adjust the fl ap by hand.

Auto Restart Control

• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and airfl ow
direction.
• This control is not applicable when TIMER is set.
See "To learn more..." for details.

To set the timer

2 sets of ON and OFF timers are available
to turn ON or OFF the unit at different preset
times.
1
2
3
TIMER
TIMER
ON
SET
1
2
3
3
OFF
CANCEL
CANCEL
1 Select ON or OFF
timer
• Each time pressed:
Cancel
2 Set the time
3 Confi rm
• To cancel ON or OFF timer, press
to select respective
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
or
ON
OFF
then press
.
SET
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 35 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
Note
POWERFUL/QUIET
ECONAVI
,
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
POWERFUL/QUIET
ECONAVI
,
,
• Cannot be selected at the same time.
Example:
OFF at 22:00
OFF
2
SET
TIMER
or
ON
OFF
or
then press
.
CANCEL
to select respective
+8/10°C
HEAT
or
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents