How To Use - Panasonic CU-HZ9RKE-4 Operating Instructions Manual

How to use

POWER TIMER
(Green) (Orange)
ECONAVI
To optimise energy saving
To select operation mode
MODE
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
FAN - To circulate air in the room
AUTO - For your convenience
+8/10°C
HEAT
To use maintenance heating
• Maintain indoor temperature at 8/10°C. Fan
switches to high fan speed automatically.
• This operation overwrite the operation mode and
could be cancelled by pressing
• Defrost operation at outdoor unit
will result in sudden cold air from
indoor unit. Eliminate cold air with
heat mode.
To switch between
POWERFUL/QUIET
powerful & quiet
POWERFUL QUIET
POWERFUL: To reach temperature quickly
POWERFUL
• This operation stops automatically after 20
minutes.
QUIET: To enjoy quiet operation
QUIET
• This operation reduces airfl ow noise.
Auto OFF/ON button
AUTO
OFF/ON
6
+8/10°C HEAT DEICE
(Green) (Blue)
MODE
.
NORMAL
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• To use in HEAT mode, press and hold the button until 1 beep is heard, then
release. And press again until 2 beeps, then release.
• Press the button again to turn off.
POWERFUL QUIET
(Orange) (Orange)
Remote control display
AIR CONDITIONER
MODE
10˚C
8˚C
To select fan speed
FAN SPEED
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• In HEAT mode, if manual fan speed caused
discomfort, set the fan speed to AUTO or lower
the fan speed.
(Green)
Indicator
Sunlight sensor and
remote control receiver
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.