Switching On; Switching Off; Storing The Machine - Stihl HSE 51 Instruction Manual

Switching On

The machine is designed for two-hand
operation, i.e. it will run only when the
operator's hands are on the front switch
lever and trigger switch.
N Make sure you have a secure and
balanced footing.
N Hold the unit with both hands – one
hand on the control handle – one
hand on the loop handle.
N Stand upright – hold the power tool
in a relaxed position.
N Make sure the cutting attachment is
not touching the ground or any other
objects.
1
2
N Push the front switch lever (1)
against the loop handle and hold it
there.
N Squeeze the trigger switch (2) and
hold it in that position.
HSE 41, HSE 51

Switching Off

N
Release the front switch lever and
the trigger switch on the control
handle.
During longer work breaks – disconnect
the plug from the power supply.
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.

Storing the Machine

For periods of 3 months or longer
N Clean the cutting blades, check
condition and spray with STIHL
resin solvent.
N Fit the blade scabbard.
N Thoroughly clean the machine,
especially the cooling air inlets.
N Store the machine in a dry, locked
location – the blade scabbard can
be mounted to the wall for this
purpose – out of the reach of
children and other unauthorized
persons.
English
29