Table of Contents
Advertisement
Power Saving Function
By default, the camera reduces power consumption by automatically
entering the modes listed below.
Mode
Medium
Display off
Stand by
High
mode
Maximum
Power off
1 You can change the amount of time that elapses before the camera enters
display off mode. The default setting is 1 minute.
2 The power-on lamp glows orange while the battery is charging.
3 The camera cannot enter stand by mode while the USB storage option is
turned on.
4 You can change the amount of time that elapses before the camera turns
off. The default setting is 1 hour. However, the camera cannot be turned off
while the battery is charging.
Level
If no operations are performed for a while
when the camera is on, the monitor turns off
automatically and battery power
consumption is reduced.
glows green in this mode.
To turn the monitor back on, press the
power switch, d button, W button or V
button.
The camera enters stand by mode if no
further operations are performed for 1
minute.
Each function enters stand by mode and
battery power consumption is greatly
reduced. The power-on lamp flashes green in
this mode.
To turn the camera back on, press the
power switch.
The camera turns off if no further operations
are performed (Shut-down timer
Almost no battery power is consumed, but it
takes a longer time to turn on the camera.
Description
1
The power-on lamp
2
3
2
Shooting and Playback
4
).
23
Advertisement
Table of Contents
