Power Saving Function - Nikon COOLPIX S810c User Manual

Power Saving Function

By default, the camera reduces power consumption by automatically entering
the modes listed below.
Mode
Display off Medium
Stand by
High
mode
Power off Maximum
1
You can change the amount of time that elapses before the camera enters display
off mode (A86). The default setting is 1 minute.
2
The power-on lamp glows orange while the battery is charging (A13).
3
The camera cannot enter stand by mode while the USB storage option is turned
on (A95).
4
You can change the amount of time that elapses before the camera turns off
(A86). The default setting is 1 hour. However, the camera cannot be turned off
while the battery is charging.
C
Power Saving Tips
Turn off functions that are not in use to reduce battery power consumption. The
quick settings on the Android OS home screen make it easy to adjust monitor
brightness, turn on/off the Wi-Fi function, etc. (A81).
Level
If no operations are performed for a while when
the camera is on, the monitor turns off
automatically and battery power consumption is
reduced.
this mode.
To turn the monitor back on, press the power
switch, d button, W button or V button.
The camera enters stand by mode if no further
operations are performed for 1 minute.
Each function enters stand by mode and battery
power consumption is greatly reduced. The
power-on lamp flashes green in this mode.
To turn the camera back on, press the power
switch.
The camera turns off if no further operations
are performed (Shut-down timer
Almost no battery power is consumed, but it
takes a longer time to turn on the camera.
Description
1
The power-on lamp glows green in
2
3
2
4
).
31