Battery Power Saving Function - Nikon Nuvis S - Point & Shoot Instruction Manual

4
Getting out of the setting
mode
Press the SEL button and the
corrected date appears on the
LCD panel.
•If another button is pressed while
setting the date/time, all the previously
set data will be set at this time.
•The date appearing in the illustration
above shows "2001, April, 25."
When the battery is replaced
•Note that 000000 appears on the LCD
panel when the battery is replaced.
•No data will be recorded if 000000
appears on the LCD.
•Repeat procedures from 1 to 4 to set the
date and time.
Battery power saving
function
•If the camera is not used for approx. 2
minutes after it is turned on, the camera
will turn itself off automatically to save
battery power. The lens automatically
retracts to the (wideangle) position
and the power turns off.
•Press the shutter release button lightly
or any other button to turn the camera
back on and the LCD panel will light up.
•To avoid accidental battery drain,
remember to turn the camera off when
not in use.
E
31