Table of Contents
Advertisement
Convenient Features
The COOLPIX S810c is equipped with a stand by mode that helps to
reduce battery power consumption. Select either power off or stand
by mode depending on the situation.
To display the selection screen, press and hold the power switch for
several seconds while the camera is on.
Stand by
Select Stand by while shooting.
When the camera is in stand by mode, press the power switch to
turn the monitor back on.
Off
Select Power off if you are not using the camera for a while. You can
select the options below to control how the camera turns off.
Prepare for quick start (default setting): The status of the camera
is saved before turning off. The camera starts up quickly the next
time you turn it on.
Quick power off: The camera turns off immediately.
B
Note
When the use of electronic devices is prohibited or restricted, turn off the
camera.
Power off
Prepare for quick start
Quick power off
Stand by
Reboot
1910
1910
1910
YP3K01(11)
6MN28211-01
Advertisement
Table of Contents
