Adjusting The Drying Programme; Loading The Laundry - Siemens WD15G421GB Instruction Manual And Installation Instructions

The buttons are sensitive, they only
■
need to be touched gently. If the
button °C Temp., 0 rpm,
û Finish in is held down, the setting
options are automatically scrolled
through.
Changing default settings for a
washing programme, e. g. washing
temperature:
Touch the °C Temp. button to set
■
desired washing temperature.
Changing the additional functions for
a washing programme, e.g. select (
speed:
Touch the ( speed/¦ eco button
■
until the ( indicator light comes on.
Note:
After changing the programme default
settings and/or additional functions, the
programme duration may change.
Adjusting the drying
programme
Note:
If an individual drying programme or
washing and drying without interruption
is selected, you can change the default
settings for the drying programme if
required.
Overview of programmes~ Page 20
Operating the appliance
Changing the default settings for
a drying programme:
Touch the Ô Drying button to set
■
the desired drying mode or drying
time (only for an individual drying
programme).
Note:
After changing the default settings for
the drying programme, the programme
duration may change.

Loading the laundry

:
Warning
Danger of death!
Laundry items pretreated with solvent-
based detergents, e.g. stain remover/
petroleum ether, may cause an
explosion if loaded into the washer
dryer.
Thoroughly rinse laundry items by hand
before washing.
Notes
Mix large and small items. Laundry
■
items of different sizes distribute
themselves better during the spin
cycle. Individual laundry items may
cause an unbalanced load.
Observe the indicated maximum
■
load. Overfilling adversely affects
the washing result and promotes
creasing.
Unfold presorted laundry items and
1.
place in the drum.
Ensure that no laundry items are
2.
trapped between the door and
rubber seal.
en
15