Positioning And Connecting; Included With The Appliance; Safety Instructions - Siemens WD15G421GB Instruction Manual And Installation Instructions

5
Positioning and
connecting

Included with the appliance

P o s i t i o n i n g a n d c o n n e c t i n g
Check the machine for transport
Note:
damage. Never use a damaged
machine. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
customer services. ~ Page 35
( Mains cable
0 Bag:
Installation and operating
■
instructions
Customer services location
■
directory*
Warranty*
■
Cover caps for openings after
■
the transport braces have
been removed
Adaptor with sealing washer
■
from 21 mm = ½" to 26.4 mm
= ¾" *

Positioning and connecting

8 Water supply hose on Aqua-Stop
models
@ Water drain hose
H Elbow for securing the water
drain hose*
P Water supply hose on standard/
Aqua-Secure models
* depending on the model
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
Spirit level for aligning ~ Page 41
■
Spanner with:
■
– WAF13 for loosening the
transport braces, and
~ Page 43
– WAF17 for aligning the appliance
feet ~ Page 41

Safety instructions

:
Warning
Risk of injury!
The washer dryer is very heavy.
■
Be careful when lifting/transporting
the washer dryer.
When the washer dryer is lifted by its
■
protruding parts (e.g. the washer
dryer door), the components may
break off and cause injuries.
Do not lift the washer dryer by
protruding parts.
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washer dryer in areas
exposed to frost or outdoors.
en
37