Hose And Cable Lengths - Siemens WD15G421GB Instruction Manual And Installation Instructions

Unscrew and remove all four
2.
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
Insert the covers. Lock the covers
3.
firmly in place by applying pressure
to the snap-in hooks.
Positioning and connecting

Hose and cable lengths

Connection on left side
or
Connection on right side
If the hose holders are used, the
Note:
possible hose lengths are reduced!
Available from dealer/customer
service:
Extension for Aqua-Stop or cold
■
water inlet hose (approx. 2.50 m).
Order no. WMZ 2380, WZ 10130,
CZ 11350, Z 7070X0.
Longer supply hose (approx.
■
2.20 m), for standard model.
en
39