Starting / Stopping The Engine - Stihl FS 55 Instruction Manual

English
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
Detaching the unit from the harness
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
22
Starting / Stopping the
Engine
Version with bike handle
Controls
1
2
7
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4 START – ignition is switched on –
the engine can start
5 F – normal run position – the engine
is running or can start
6 STOP-0 – engine off – the ignition is
switched off
6 5
4
3
2
1
Symbol on slide control
7 h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Starting
Press down the trigger lockout lever
N
and squeeze the throttle trigger
and hold them in that position.
N
Move the slide control to START
N
and hold it there.
Now release the throttle trigger,
N
slide control and trigger lockout in
that order. This is the starting
throttle position.
Go to "All versions".
N
FS 55, FS 55 C, FS 55 R, FS 55 RC