Fueling; Fitting The Harness - Stihl FS 55 Instruction Manual

English
Dispose of remaining fuel and cleaning
fluid properly in accordance with local
regulations and environmental
requirements.
20

Fueling

Before fueling, clean the filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Position the machine so that the
N
filler cap is facing up.
Open the filler cap.
N
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends you use the STIHL filler
nozzle (special accessory).
WARNING
After fueling, tighten down the filler cap
as securely as possible by hand.

Fitting the Harness

The type and style of the harness
depend on the market.
The use of the harness is described in
the chapter on "Approved Combinations
of Cutting Attachment, Deflector, Handle
and Harness".
Shoulder strap
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the machine.
N
FS 55, FS 55 C, FS 55 R, FS 55 RC