Rack Mounting The Switch - HP 2530 SERIES Installation And Getting Started Manual

W A R N I N G
N o t e

Rack Mounting the Switch

1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Figure 2-3. Attaching mounting brackets
For safe reliable installation, only use the screws provided in the
accessory kit to attach the mounting brackets to the switch.
The mounting brackets have multiple mounting holes and can be rotated
allowing for a wide variety of mounting options. These include mounting the
switch so that its front face is flush with the face of the rack, or mounting it
in a more balanced position.
Installing the Switch
Installation Procedures
2-9