Table of Contents
Advertisement
file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s1104010100.html
11.4.1.1 Adjustment procedure
TOP PREVIOUS NEXT
1. While pressing PAUSE and OPEN/CLOSE buttons on the main unit, press "5" on the remote
control unit.
2. Confirm that "J_xxx_yyy_zz" is shown on the front display.
For your information:
"yyy" and "zz" shown to the right have nothing to do with the jitter value. "yyy" is the error
counter, while "zz" is the focus drive value.
Note:
Jitter value appears on the front display.
3. Play test disc T01 (inner periphery).
4. Adjust tangential adjustment screw so that the jitter value is minimized.
5. Play test disc T43 (outer periphery).
6. Adjust tilt adjustment screw 1 so that the jitter value is minimized.
7. Play test disc T43 (outer periphery).
8. Adjust tilt adjustment screw 2 so that the jitter value is minimized.
9. Repeat adjusting tilt adjustment screws 1 and 2 alternately until the jitter value is minimized.
TOP PREVIOUS NEXT
file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s1104010100.html03.10.2007 22:48:36
Advertisement
Table of Contents
