Service Mode Table - Panasonic DVD-S35GD Service Manual

file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s0902000000.html

9.2 Service Mode Table 1

TOP PREVIOUS NEXT
The service modes can be activated by pressing various button combination on the player and remote
control unit.
Player buttons Remote control unit buttons
PAUSE
+
OPEN/CLOSE
PAUSE
SKIP/
SEARCH<<
OPEN/CLOSE
TOP PREVIOUS NEXT
file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s0902000000.html03.10.2007 22:47:09
0 Displaying the UHF display F_ _ _
5 Jitter check, tilt adjustment
*Display shows J_xxx_yyy_zz
"yyy" and "zz" shown to the right have
nothing to do with the jitter value. "yyy"
is the error counter, while "zz" is the
focusdrive value.
Referto section 11.4. for Optical Pickup
Tilt Adjustment Procedure.
6 Checking the region numbers and
broadcast system
7 Checking the program version
9 Lighting Confirmation Function of
Display Tube
DISPLAY Checking the laser drive current
PAUSE Writing the laser drive current value after
replacing the optical pickup (do not use
for anything other than optical pickup
replacement)
Initializing the DVD player
(restoring factory preset settings)
Application Note
Refer to section 9.3. Self-Diagnosis
Function (UHF Display).
Refer to section 11.4. Optical Pickup
Tilt Adjustment
Check the IC6301 FLASH ROM
program.
Refer to section 8 Optical Pickup
Replacement Procedure.
Refer to section 9.5. Initializing the
DVD player.