Table of Contents
Advertisement
file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s1001000000.html
10.1 Recovery after the dvd player is repaired
TOP PREVIOUS NEXT
When FROM or module P.C.B. is replaced, carry out the recovery processing to optimize the
drive.
Playback the recovery disk to process the recovery automatically.
Recovery disc (Product number: RFKZD03R004)
Performing recovery
1. Load the recovery disc RFKZD03R004 on to the player and run it.
2. Recovery is performed automatically. When it is finished, a message appears on the
screen.
3. Remove the recovery disc.
4. Turn off the power.
Note:
This unit requires no initialization process carried out after the traditional DVD players were repaired.
When the recovery measures are taken, the customer setting will return to the factory setting as same as
the procedure described in item of "Initialization" in 9.5. is carried out. Write down the contents of the
setting before recovery processing,and resetthe player.
TOP PREVIOUS NEXT
file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s1001000000.html03.10.2007 22:47:57
Advertisement
Table of Contents
