file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s0805000000.html
8.5 Traverse Block
TOP PREVIOUS NEXT
1. Lift the traverse block while spreading the hook of the mechanical chassis unit.
2. Disengage the tabs from the holes of the mechanical chassis unit.
<Precautions in reassembling the traverse block>
•Take the following precautions when reassembling the traverse block.
1. Turn traverse gear on the traverse block to let trigger lever turn rightward. (Front view)
2. Bring cam gear lever to the lever adjusting position at the end of mechanical chassis unit.
3. Put tabs A and B into slots A and B respectively.
Place tabs C into hooks to mount the traverse block on mechanical chassis unit. (Slot A...
Mechanical chassis unit, Slot B... Cam gear)
file:///C|/Documents and Settings/eDOK/Рабочий стол/DVD-S35xx/s0805000000.html (1 of 2)03.10.2007 22:46:16